Cummins InPower Pro V11.5.20 + INCAL [09.2017]
Cummins InPower PRO V11.5 is a Windows-based service and diagnostic device. This tool provides digital support features including; adjustments for trims and settings, monitoring, strip chart, info logging, seeing errors, and record capacity.
Cummins InPower PRO V11.5 provides the following functions for monitored equipment: Direct connection capability from a personal computer to Power Command genset controls, transfer controls, and system controls; For details on devices supported refer Technical Details tab.
Connection to generator set or transfer switch controls via modem or to multiple controls.
Allows the monitored equipment to send alarm information to a connected computer.
Configurable for units of measurement, and level of user access (read only, read/change values, administrator).
InPower V11.5 –New Features and Enhancement
What’s New?
Operating Systems Supported :
NOTE: InPower V11.5 is compatible with Windows 10
Tool is supported on following O.S.
–Windows 7
–Windows 8 & 8.1
–Windows 10
--Following O.S. are No more supported
–Windows X.P and below
–Windows VISTA
New Enhancements/ Features Supported
– Generic Site to connect to any device –AutoConnect
– Monitor Utility can log for more than 24 hrs. continuously
Search Capability improvements in InPower
– Option to run the monitor utility for a selected duration of time
– Display production firmware version of controller on connection
– Option to generate Save Adjustment report
– Event Handler Enhancements
– Capture File overlay operation available from right click menu
– Capture File Manager Utility
– PCC1301 ERT Adjusting Utility in InPower
– Setup Screens highlight the current active screen for easy recognition
– Next & Previous Buttons on each screen of Setup Screens for easy navigation
– Setup Screens shall be accessible via Tool bar Icon Click for PCC3300 & PCC2300V2
– Enabling/Disabling of Setup Mode shall be available from Tool Bar Icon click
– Enhancements in InPower Update Manager Utility
– Enhancements in InCalDownloader & Extractor Utility
– Configurable Input / Output Setup screens for PCC3300 & PCC2300V2
– Initial Calibration Window updates for Set Dataplate from Capture File
– Capture Files to always display the Creation Time Stamp
Warning message display, if user is trying to download a firmware version less than the version already present in the controller(*PCC1302 & PS0500)
– OEM Setup Screen updates for ECR-26285
– Progress bars in ETools shall show realistic progress status
– Option for selecting all features of connected controller
– Site’ pane shall be more Intuitive
– Remove Site Option
New Controllers Supported in V11.5 :
–Added support for following controllers.
–PS0600
–Arrow Air Cooled Devices
–MCC3332 –AMMPS Main MLD Controller
Bug/Issue fixes in InPower :
– Monitor Logging was terminating if the connection to the controller is lost
– Tool was showing an error message continuously when presenting desktop via ‘Skype for Business’ causing inconvenience
– ‘Capture to File’ option was not enabled when InPower detects Memory corruption in PCC1302
– Reports were not opened in Maximized Mode
– PCC2300V2 Genset response ENUM changes in InPower PRO
– Update Add Site Window and remove obsolete controls on UI
– Non-English Characters in Capture File Name handling
--Update Manager Utility’s System Tray Icons do not disappear
– Save Adjustment on Setup Screens takes considerable amount of time
– Tool Crashes when user Settings File gets corrupted
-Monitor Application does not update dynamically if it has at least 1 Write Only parameter in it
Issue (Bug) Fixes :
Monitor Logging shall terminate if the connection to the controller is lost
-Until now the logging process used to continue and thus consuming more system memory, thereby eventually crashing the application. This has been taken case in V11.5
Bug: Tool shows an error message continuously when Showing Desktop via Skype causing inconvenience
-ETools shall not pop up message “An outgoing call cannot be made since the application is dispatching an input-synchronous call” when user shares the screen using skype from V11.5
Capture to File option shall be Enabled when InPower detects Memory corruption in PCC1302
-When the PCC1302’s memory is corrupted, only option user had was to Initial Calibrate the controller. However, it is recommended to save the current settings in Capture File format for later use or to send it to the System’s engineers for troubleshooting the issue. Thus, InPower allows Capture To File option when Memory corruption is detected in PCC1302 from V11.5
Reports shall open in Maximized Mode
PCC2300V2 Genset response ENUM changes in PRO
-InPower Pro displays the enumeration parameter "2300 Genset Response" instead of “Genset Response” parameter to show fault severity in events and faults template going forward
Update Add Site Window and remove obsolete controls on UI
-Monnet and Remote sites were obsoleted very long ago. However, they were still on the UI and thus creating confusion. They have been removed now and the Add Site Window UI is Cleaned.
Non-English character issue in Capture File Name
-Until now, if user tried to connect to a Capture File which has Non-English chars in its Name, the tool used to crash. This scenario is handled correctly now and the tool shall not crash. User can use “Capture File Manager Utility” to rename the file to use it later
Update Manager Utility’s System Tray Icons do not disappear
-Every launch of InPower, a new System Tray Icon was added for Update Manager and was never cleared from the tray. This issue as been taken care in V11.5
Save Adjustment on Setup Screens takes considerable amount of time
-Parameter Adjustment via Setup Screens refreshed the tool’s primary screen thereby increasing the amount of time required for saving the parameters. A check is put in place to refresh the Primary tool’s UI only if the parameters were updated from the tool’s primary UI. When adjusting parameters from Setup Screens the main screen shall not be refreshed. It will be refreshed once the setup screens are closed and user comes back to the main UI.
Tool Crashes when user Settings File gets corrupted
-Whenever the User Settings File got corrupted, tool used to throw exceptions and user was unable to use the tool. Tool shall now handle the situation gracefully and provide possible resolution steps
Monitor Application does not update dynamically if it has at least 1 Write Only parameter in it
-Write Only Parameters are not supported by Monitor Applications. If any older TPL file is opened via Monitor Application which has Write Only parameter in it, the same is discarded and rest of the parameters shall be monitored there onwards
-The reports generated by Monitor Application and the Snapshot applications were not opened in Maximized mode thus creating confusion to the user. From V11.5, all such reports generated would be opened in Maximized mode and brought to focus for easy recognition by the user.
Region: All regions
Language : Multi languages
Operating system :
Windows 10 32 bit (x86) - Windows 10 64bit (x64)
Windows 8.1 32 bit (x86) - Windows 8.1 64bit (x64)
Windows 8 32 bit (x86) - Windows 8 64 bit (x64)
Windows 7 32 bit (x86) - Windows 7 64 bit (x64)
Windows Vista 32 bit (x86) - Windows Vista 64 bit (x64)
Windows XP 32 bit (x86) -Windows XP 64 bit (x64)
Quantity of CD: 1 CD
Data of update: 09/2017
Price : (private message)
.jpg "Cummins QuickServe DVD All Families Engines v2014")
.png)
.jpg)
.jpg)
.png)
.jpg)
.jpg)
.jpg)
.jpg "CUMMINS InPower Pro V 9.5 + ACTIVE")
66666.jpg "CUMMINS InPower Pro V 9.5 + ACTIVE")
